I
Injector Body Design: All steel with composite plastic connector, Yellow band
Electrical connector type: Minitimer (EV1)
Spray Nozzle: Single disc, wide spray pattern
Length: 1.85 inches, 47 MM
Oring to Oring on Certer: 1.5 inches, 38 MM
Diameter: 0.55 inches, 14 MM
Orings: Top and bottom, .57 inches, 14.5 MM
Resistance: 14.5 Ohms
Technical Data Performance - Typical
fuel flow:510CC/MIN
- Linearity range (Tj = 4 ms): ± 2.5 %
- Max. fuel pressure allowed: 500 kPa
- Maximum duty cycle: 90 %
- Operating temperature range : -30 to 110 °C
- Vibration (peak): 30 g
Test conditions
- Fluid: N-Heptane
- density (@ 20°C) : 0.684 kg/litre
- Ambient and fluid temperature: 23 °C
- Power supply : 14 Vdc
- Injection frequency: Fully open
- Pulse duration: n/a
- Pressure : 3 bar
Mechanical Characteristics
- Height : 47.2 mm
- Outside diameter (connector excluded) : 15.3 mm
- Weight : 35 g
Electrical Characteristics
- Power supply : 8 ÷ 16 Vdc
- Resistance: 14.5 Ohm
- Inductance at 1KHz: 12.0 mh
- Driver type : ON-OFF
Equivalent Part Numbers: IWP-189
