Sales & Support: Request A Quote
Home ProductsDENSO INJECTOR

Mazda RX-8 Injectors Yellow Denso 195500-4450 450cc for Turbo MX-5 BPT 0280155917 & XL2E-C5A

Mazda RX-8 Injectors Yellow Denso 195500-4450 450cc for Turbo MX-5 BPT 0280155917 & XL2E-C5A

Mazda RX-8 Injectors Yellow Denso 195500-4450 450cc for Turbo MX-5 BPT 0280155917 & XL2E-C5A

Product Details:

Model Number: 195500-4450
Contact Now
Detailed Product Description

 

 

MANUFACTURER JINJIANG JUNRI MACHINERY CO.LTD
COMPANY BRIEF INTRODUCTION Professional making fuel injector since 1991
ITEM NAME GASOLINE INJECTOR ,BICO INJETOR,INYECTORE,INYECCION
INJECTOR REF NO
Part Numbers:
DENSO : 297-0041 / 2970041 / 297 0041
DENSO : 195500-4450 / 195500 4450 / 1955004450
GB Manufacturing : 842-12332 / 842 12332 / 84212332
INJECTOR SPRAY HOLE 4
APPLICATION Direct bolt in for 1989-2005 Mazda Miata to upgrade to 420cc injectors!

 

ABOUT FUEL INJECTOR:

Although fuel injectors are available in various styles , they can be divided in two specific categories: top feedand side feed fuel injectors. The designation of top feed and side feed indicates how the fuel enters the injector.

Side Feed Fuel Injectors:

Side feed fuel injectors are injectors where the fuel injector’s body is surrounded by fuel and the fuel are fed through a hole or holes in the side of the fuel injector. This category can again be sub divided into two groups: throttle body and manifold side feedfuel injectors.

Some of the older vehicles made use of throttle body fuel injection. The fuel injector is located in what looks like a carburetor right above the throttle plate. Depending on engine size and performance delivery, manufacturers made use of 1 or 2 of these throttle body injectors. Some of the aftermarket high performance setups used as much as 4 throttle body injectors.

Top Feed Fuel Injectors:

Top feed fuel injectors are fed from the top of the injector and are divided into three basic sub categories. Hose end, normal top feed and direct fuel injection injectors.

Some of the earlier vehicles were equipped with a hose that connects the injector to the fuel rail. These hose ends were connected by means of a hose clamp to the fuel rail side, and a ferrule on the fuel injector side. Some hose end injectors had hose clamps on both the fuel rail and the fuel injector side. Age will cause the fuel hose to become brittle and crack.

An O-ring or seal forms a seal between the fuel injector and the intake manifold.

 

 

 

OEM # XL2Z9F593CA

Casting # 0280155917 & XL2E-C5A

Ford Truck 6.8L V10

 

 

 

 

 

 

CHECK THE FUEL INEJCTOR RESISTANCE:

Electrical test is to check each injector's ohm resistance. This tests the injector's coil windings for shorts or opens in the windings.

 

 

 

INJECTOR CLEAN:

The injectors are now removed from the flow bench and are installed into the ultra-sonic cleaning tank which contains a special cleaning solution formulated specifically for electronic fuel injectors. Here the injectors are pulsed at varying pulse widths while being subjected to ultra-sonic waves that break up and dissolve debris that has collected on the outside and inside of the injector outlet. This process is performed for a minimum of 30 minutes depending upon the condition of the injectors.

 

 

 

FUEL FLOW TEST:

 

 

The injectors are now ready to reassemble with new o-rings, inlet screens and pintle caps (if applicable)

 

 

 

BRAND JUNRI
LOGO NO ANY LOGO ,PRINT YOUR LOGO
QUALITY GUARANTEE 12 MONTH
PACKING WHITE BOX,BROWN BOX ,COLORFUL BOX,BOTTLE,CUSTOMIZED BOX
MOQ 20PCS
OEM AND ODM AVAILABLE
PAYMENT TT,WEST UNION ,PAYPAL
SHIPPING TIME 2-60DAYS

 

PACKING:

 

 

 

 

 

 

 

 

Contact Details
Jinjiang Junri Machinery co.ltd

Contact Person: Mr. xu

Tel: +86-595-85720302

Fax: 86-595-85788828

Send your inquiry directly to us (0 / 3000)